Top Left Corner
free Shipping
 
 
Sidebar left top
VH Audio Main Page
Products by VH Audio, Acrolink, Acoustic Revive, Bybee, Eichmann (ETI), Furutech, HiFi Tuning, IsoClean, Mapleshade, Neotech, Oyaide, WattGate, and WBT
Read reviews about VH Audio products
Special deals
Frequently asked questions
Who is VH Audio?
Contact VH Audio

Home   >   Products   >  Bulk Wire, Cable & Hose

V-Quad Interconnect Cable & Hookup Wire




Enter Quantity --->>

    View your shopping cart

View CategoryView Similar Products

NEW ITEMS! The VH Audio V-Quad™ Cu21 (4 x 21 AWG) and Cu24 (4 X 24 AWG) analog interconnect cables each use VH Audio's UniCrystal™ OCC copper for each of the 4 single conductors, arranged in a Star Quad geometry. The V-Quad Cu21 and the V-Quad Cu24 each use solid core conductors (not stranded). Each of the conductors is insulated with VH Audio's AirLok™ dielectric- a proprietary form of foamed/cellular Fluoropolymer insulation with a dieletric constant (D.C.) of less than 1.5.

The conductors are arranged in a low inductance "star quad" geometry that is ideal for analog interconnects that need a self shielding geometry (but don't need a full shield), DC umbilical cables, and hookup wire from loudspeaker crossovers to tweeters and smaller midrange drivers.

At the core of the V-Quad Cu24 cable, natural cotton is used to buffer micro-vibrations. The entire Star Quad bundle is then wrapped securely, with two layers of PTFE, to constrain inter-conductor micro-movements. Finally, VH Audio's proprietary ultra-flexible jacket (derived from the formula for VH Audio's AirSine power cable) is used to further buffer internal, as well as external resonances/vibrations.

The VH Audio V-Quad Cu24 is recommended for headphone cables, internal speaker crossover hookup wire (tweets and mids), line-level / phono analog interconnect applications, or signal hookup wire inside electronic components.

The V-Quad Cu21 is ideal for DC umbilicals, internal speaker crossover hookup wire (tweets and mids), or very low resistance signal hookup wire inside electronic components. The maximum sustained temperature rating of 150 degrees C means it can be used reliably inside vacuum tubed electronics.

For DC umblicals, the Oyaide DC 2.1G and Oyaide DC 2.5G DC connectors are ideal.

Outside diameter is .187", for both the V-Quad Cu21 and Cu24. Capacitance is a moderate 29.13 pF per foot for the V-Quad Cu24, while achieving very low inductance of .0716 uH per foot. DC Resistance is 12.95 mOhms per ft, when measuring 2 out of the 4 conductors wired in parallel (as connected in a star quad geometry).

V-Quad Cu21 Audio Cable


VH Audio V-Quad Cu24 Audio Cable


The V-Quad Cu21 is recommended for:

  • D.C umbilicals (18 AWG aggregate, per pole)
  • Loudspeaker crossover wiring for tweeters and some mids
  • Analog interconnects terminated with RCA style connectors
  • Analog interconnects terminated with XLR style connectors, when used with an externally-spiraled ground wire of at least 21 AWG
  • Signal hookup wire within electronic components.
  • The high heat rating makes the V-Quad Cu21 ideal for vacuum tube electronics

The V-Quad Cu24 is recommended for:

  • D.C umbilicals (21 AWG aggregate, per pole)
  • Ultra high-end Headphone Cable (use two runs of cable, one run per channel).
  • Loudspeaker crossover wiring for tweeters
  • Analog interconnects terminated with RCA style connectors
  • Analog interconnects terminated with XLR style connectors, when used with an externally-spiraled ground wire of at least 21 AWG
  • Signal hookup wire within electronic components.
  • The high heat rating makes the V-Quad Cu24 ideal for vacuum tube electronics

Specifications:

Cable Diameter: 0.187" (4.75 mm)
Conductor size: 4 X 21 AWG
(solid UniCrystal OCC copper)
Conductor purity: .9999997+ (6N)
Conductor geometry: Star Quad

* DC Resistance:

6.4 mOhms / ft
(per pole - 2 conductors)
* Capacitance (Cs): 35.65 pF / ft
* Inductance (Ls): .0590 uH / ft
* Loss Tangent (DF): <.00015 @ 1 Khz
Max DC Voltage: 300V DC
Max Temp: 150 degrees C

* As measured on Quadtech LCR1920

Specifications:

Cable Diameter: 0.187" (4.75 mm)
Conductor size: 4 X 24 AWG
(solid UniCrystal OCC copper)
Conductor purity: .999997+ (5N)
Conductor geometry: Star Quad

* DC Resistance:

12.95 mOhms / ft
(per pole - 2 conductors)
* Capacitance (Cs): 24.87 pF / ft
* Inductance (Ls): .0716 uH / ft
* Loss Tangent (DF): <.001 @ 1 Khz
Max DC Voltage: 300V DC
Max Temp: 150 degrees C

* As measured on Quadtech LCR1920

Home   >   Products   >  Bulk Wire, Cable & Hose

Search Site

Have a question? Contact Us

Search for Products







New products

Gift Certificates

Shipping information

Terms and conditions

Privacy and security

DIY recipes and notes


Shop by Brand:
Acoustic Revive
Bybee
ETI
Environmental Potentials
Furutech
Heatshrink
HiFi Tuning
KLE Innovations
Mapleshade
Neotech
Oyaide
Synergistic Research
Techflex
V-Cap
VH Audio
WA Quantum
Wattgate
WBT
Parts and Wire
AC Connectors
AC Inlets (IEC)
AC Plug Adapters
AC Receptacles (Wall)
Bybee Purifiers
Fuses
Heatshrink | Techflex | Solder
RCA | XLR | DIN | BNC | Phone
Spades | Bananas | Posts
V-Cap Capacitors
Wire and Cable


Tweaks and Accessories
AC Power Conditioners
AC Power Bars / Strips
Cables - AC Power
Cables - Interconnects
Cables - Speaker
Contact Enhancers
Miscellanous Gadgets
RFI / EMI Shielding
Room Tuning / Treatments
Vibration / Isolation Control


HOT new products:
V-Cap Capacitors
Synergistic Research MASTER Fuses
Furutech NCF Cable Booster


Visa | Master Card | Discover Network | Paypal | American Express


X