REM-8 by Acoustic Revive
Acoustic Revive REM-8
Acoustic Revive REM-8
Click here to order online!

 
Product Features of the Acoustic Revive REM-8:
Strong electromagnetic waves emanate from audio equipment power supply transformers. These waves may have a negative influence on circuit boards and internal wiring, as well as neighboring components and cables, potentially degrading your system's sound quality. In some equipment, transformers have shielded covers or a power supply unit housed in a separate chassis. In most cases, the magnetic field passes right through the shielding and equipment housing. Unfortunately, until the REM-8, there was no effective solution for audiophiles to mitigate or avoid such problems altogether.

The Acoustic Revive REM-8 releases an electromagnetic wave generated by its original print coil and circuit. Due to its revolutionary concept and structure, the electromagnetic wave released from the REM-8 cancels electromagnetic waves emanating from the transformer(s) being treated with the REM-8. To use the REM-8, simply place it underneath your component's power supply transformer without making physical contact. The REM-8 will neutralize potentially harmful electromagnetic waves influencing your equipment and cables. The Rem-8 may dramatically reduce noise, improve soundstage imaging and remove electronic glare, resulting in a very natural, realistic sound quality.

The Rem-8 is also effective on isolation transformers and noise reduction transformers!
The REM-8 EMF Canceller also has a powerful effect on specialized components such as, isolation transformers and noise reduction transformers. Most isolation transformers and noise reduction transformers have huge power supply transformers compared to those used in audio components. There are very powerful electromagnetic waves emanating from these types of transformers, which may degrade performance. The very components whose purpose is to improve sound may ultimately have a negative effect on surrounding components, due to this electromagnetic field radiation! Placing the Acoustic Revive REM-8 underneath isolation and noise reduction transformers will help neutralize their electromagnetic waves and will allow their full potential to be fleshed-out. The result in using the Rem-8 may be a huge increase in sound quality throughout your system.

The Acoustic Revive REM-8 is also effective on vacuum tube amplifier output transformers too!
The Acoustic Revive REM-8 EMF Canceller has an astounding effect on amplifiers with output transformers such as vacuum tube and Mcintosh amplifiers. On these kinds of amplifiers, the Acoustic Revive REM-8 not only has an effect on the power supply transformer, it also has an effect by placing it underneath the output transformer. Any electromagnetic wave from the output transformer will be neutralized and cancel any negative influence on the surrounding circuit. Using the REM-8 to improve the performance of output transformers may lead to a dramatic improvement in sound quality.

Equipment with switching type power supplies may also improve with the REM-8!
Recently, components employing small, high efficiency switching type power supplies, rather than large power transformers have come into vogue. The REM-8 has been found to have a significant effect on this type of equipment. Switching power supplies release a very large amount of electromagnetic waves, just like huge power supply transformers, but they also scatter powerful electromagnetic waves, which further deteriorates the performance of other circuits and components; Just place the REM-8 underneath, near the switching power supply circuit. It will help eliminate noise and the unnatural shimmering sound, which is characteristic of some switching power supplies. Noise is reduced and the sound should become very smooth and realistic with the REM-8 in the mix.

Superb effect on video equipment too!
The Acoustic Revive REM-8 also has a superb effect on video equipment such as, projectors, Plasma TVs, DVD players, DVD recorders and BlueRay players. On projectors or Plasma TVs, just place the REM-8 near their power transformers or stick it on using Velcro or two-sided tape. On DVD recorders, DVD players and BlueRay players, place the REM-8 underneath or near the power supply unit. This will neutralize the electromagnetic waves emanating from the power supply and stabilize the video circuit, leading to an improvement in the S/N ratio, color saturation and contrast ratio.

Size: W80 X D105 X H14mm

Two size AAA batteries included with the Acoustic Revive REM-8

Click here to order online!

Translation from original text- Copyright VH Audio, Inc. All rights reserved.
www.vhaudio.com